Sliding Door Handle

$39.00

Proudly made in the USA.
Color match to your track kit.
Easy to install.
Complete kit with all fasteners, mounting hardware, and two handles. Handles are 10" long and 1" deep. Fasteners supplied are intended for handles to mounted back to back over 3/4" thick panel.
Sleek and functional handle to nest on each side of barn door to give grasping point to move door open or closed.
Low profile design intended specifically for sliding barn doors gives a sleek appearance and easy clearance on back of door.
Handle is designed to be used in either a push or pull application to function on both sides of door for both opening and closing.

Each handle is 10" tall, 1" deep, 1" wide.
Steel is 1/8" thick.
Supplied as a pair/ one for front and back of door.
Bolts supplied are intended to be used with mounting pair of handles back to back on each side of a ¾" thick panel.
Intended installation is over recessed panel over thinner part of door. Customer must supply their own bolts if mounting over any part that is different than 3/4" thick.
If mounted on a typical 1 ¾" door that has a ¾" panel, than the handle will protrude ½" past edge of frame.
If mounted on a 2 ¼" thick door that has a ¾" panel, than the handle will protrude 1/4" past edge of frame.
Note with colors they do not necessarily match other manufactures color codes of similar names. Raw unfinished steel is exactly that with no finish or sealer on it. Unfinished steel arrives from the steel factory in colors from shiny silver to dark gray, It does not have a coating, cleaning or buffing done to the raw steel. It can tarnish and rust. It may already have rust spots. Most customers who order the unfinished color intentionally do this because they intend to finish it themselves with a different finish, prefer the industrial look, or want to rust patina the steel.

You are here