Proudly made in America. We craft this material out of mixed oak. Solid wood, 100% recycled, reclaimed lumber boards used for wall cladding. Normally this wood paneling ships within three days of ordering! Lightweight and simple to install on existing walls. Sliced thin for ease of install around outlets and baseboards. All straight sides make fast and easy installation. No lap profile on edges allows for faster install and better yield on product. Readily accepts stain and finish so you can customize to your preferences. First picture shown here is with no finish on it. No complex tools needed for installation. Basic carpentry tools required such as saw, hammer and finish nails or brad nail gun, tape measure, caulking gun with construction adhesive, painting tools, etc.

Any combination of oak (with a possibility of up to 5% other hardwood species). Blend really varies in color and texture from batch to batch that is produced. Overall thickness is 3/8" with tolerances +/- 5/32". Not planed on back side so less dimensional accuracy for thickness on this product than some of our other paneling products. Backside face has bandsawn texture.Â It has not been surfaced flat on either face by a planer or sander, so has much more variation in thickness and flatness than our other paneling products. Consistent widths of 5" only. This material has been ripped to this consistent width. Ends are not square cut or defected. This product has much more variability in dimensional accuracy and a higher waste factor than our other accent paneling products. One face has fresh resawn texture from bandsaw and other face is slightly older patina. Original patina face is not overly old or weathered looking; it may be band sawn or circle sawn. Color is mixed blend of honey brown to grey. No sanding or planing on either face. Edges fresh straight cut with no profile. Material is not square cut on ends. The source of this material had consistent lengths of around 10" 3"; boards may be a combination of full lengths and shorter lengths in your actual packaged order. (Note that orders less than 400 square feet may have boards down to 10" in length. This is due to different packaging to try to save on shipping cost and get you the lowest possible price. Orders less than 400 square feet are likely to be packaged in boxes 8' long so they can be shipped by UPS ground instead of freight truck. Lengths in these boxes will be random length 10 to 96" long. If customer only wants to receive the 10' material they can special request that at an extra cost.) Material may be random length for all orders depending on inventory; if specific length requirements are necessary confirm before placing order. Shipped as individual boards. Some cupping may be present in this product/ pieces are not perfectly flat since it has not been planed on the back side. Some checking and cracks present. Nail holes in a semi-consistent pattern on some ends. This product is reclaimed but it is not as weathered looking as some older barn board material. Product is shipped with no stain or finish on it. Recommended adhesive is PL brand for installation over plywood or OSB. Always acclimate paneling to conditions before install and store in dry place. Decorate quickly and easily with reclaimed color and texture on a wall. Not meant for exterior applications or flooring. Kiln dried. No fill in loose knots or nail holes. Weighs about 1.4 pounds per square foot on average. Priced by the square foot of material shipped. Note RLP makes no representation as to how much material a customer needs. It's up to the customer to measure job accurately and order the correct amount of material based on intended installation. Usually, 10% extra should be ordered for a waste factor. (For example, if you have a wall that is 20 long and 8 feet high you probably should order at least 176 square feet 20 x 8 x 1.1 = 176) Installation method and pattern could cause waste higher than 10%. We do not guarantee the quantity of material on coverage; we sell it by the square foot of material delivered. Future orders will be charged at the quantity ordered at the time of each individual order. Note pricing table for discounts.

The quantity of material in total square feet that you order made according to specifications in this listing; there are not necessarily equal or specific quantities in linear or square foot terms for each width. Shipped as random length individual boards combined in cardboard boxes of various sizes up to 100 sf per box depending on total quantity ordered. The customer should include extra in their total to cover a waste factor. Smaller and more complicated jobs have a higher waste factor. Note this product has no guarantee for specific ratios of colors or lengths. This is a completely random blend and will vary from the pictures and from batch to batch. Only shipped in 25 SF increments. Lots of nostalgia along with comments on your decorating. Free shipping (check our customer service page for terms). Not including installation, finish material, glue, backing material or tools.

See our warranty . Solid wood paneling is sold as is.Â It matches the specifications provided here, but there is nothing to warranty on the natural, solid wood. Not for exterior or structural use- Intended for interior dry, climate controlled applications only over plywood or OSB substrate. Â Wood is kiln dried to 6-8% moisture content; if ambient moisture is higher than that acclimate prior to installation. All products sold by RLP are non-refundable and non-returnable since most are made to order.

Accent Wall Paneling - Oak Blend | Reclaimed Lumber Products

Create your own DIY decorative wood wall with these reclaimed wood wall planks; buy online (check our customer service page for terms).

Solid reclaimed recycled oak paneling boards for decorative siding, interior walls or ceilings. Honey brown to grey colors/ original patina and texture. 5" wide planks.

Promotional discount automatically applied--- Order over 1000 square feet of this product in one order and you save 5%.

NOTE- with this product inventory is out in the 5" width. We currently have inventory matching in all specifications in a 4 1/4" width only. If you order at this time you will receive 4 1/4" width in the total square feet that you order. Check availability before ordering. Other options possibly available.

Priced by the square foot of material shipped. Only sold in increments of 25 SF.

Order By SQ Foot

Order A Sample

Square Feet

Price/SF

$9.00

Name of area

Length in Inches

Width in Inches

Square Feet

Section 1

Section 2

Section 3

Add another area

Clear Results

Total Square Feet

Waste Percentage

Subtotal

0.00

Waste

0.00

Total

0.00

* All paneling product is sold in 25 square foot increments. The total square feet added to the cart will be rounded up to the nearest 25.

$9.00 CAD

Size

Produc variants

Proudly made in America. We craft this material out of mixed oak.
Solid wood, 100% recycled, reclaimed lumber boards used for wall cladding.
Normally this wood paneling ships within three days of ordering!
Lightweight and simple to install on existing walls. Sliced thin for ease of install around outlets and baseboards.
All straight sides make fast and easy installation. No lap profile on edges allows for faster install and better yield on product.
Readily accepts stain and finish so you can customize to your preferences. First picture shown here is with no finish on it.
No complex tools needed for installation. Basic carpentry tools required such as saw, hammer and finish nails or brad nail gun, tape measure, caulking gun with construction adhesive, painting tools, etc.

Any combination of oak (with a possibility of up to 5% other hardwood species). Blend really varies in color and texture from batch to batch that is produced.
Overall thickness is 3/8" with tolerances +/- 5/32". Not planed on back side so less dimensional accuracy for thickness on this product than some of our other paneling products. Backside face has bandsawn texture.Â It has not been surfaced flat on either face by a planer or sander, so has much more variation in thickness and flatness than our other paneling products.
Consistent widths of 5" only. This material has been ripped to this consistent width.
Ends are not square cut or defected. This product has much more variability in dimensional accuracy and a higher waste factor than our other accent paneling products.
One face has fresh resawn texture from bandsaw and other face is slightly older patina. Original patina face is not overly old or weathered looking; it may be band sawn or circle sawn.
Color is mixed blend of honey brown to grey.
No sanding or planing on either face.
Edges fresh straight cut with no profile. Material is not square cut on ends. The source of this material had consistent lengths of around 10" 3"; boards may be a combination of full lengths and shorter lengths in your actual packaged order. (Note that orders less than 400 square feet may have boards down to 10" in length. This is due to different packaging to try to save on shipping cost and get you the lowest possible price. Orders less than 400 square feet are likely to be packaged in boxes 8' long so they can be shipped by UPS ground instead of freight truck. Lengths in these boxes will be random length 10 to 96" long. If customer only wants to receive the 10' material they can special request that at an extra cost.) Material may be random length for all orders depending on inventory; if specific length requirements are necessary confirm before placing order.
Shipped as individual boards.
Some cupping may be present in this product/ pieces are not perfectly flat since it has not been planed on the back side.
Some checking and cracks present.
Nail holes in a semi-consistent pattern on some ends. This product is reclaimed but it is not as weathered looking as some older barn board material.
Product is shipped with no stain or finish on it.
Recommended adhesive is PL brand for installation over plywood or OSB. Always acclimate paneling to conditions before install and store in dry place.
Decorate quickly and easily with reclaimed color and texture on a wall. Not meant for exterior applications or flooring.
Kiln dried. No fill in loose knots or nail holes.
Weighs about 1.4 pounds per square foot on average.
Priced by the square foot of material shipped. Note RLP makes no representation as to how much material a customer needs. It's up to the customer to measure job accurately and order the correct amount of material based on intended installation. Usually, 10% extra should be ordered for a waste factor. (For example, if you have a wall that is 20 long and 8 feet high you probably should order at least 176 square feet 20 x 8 x 1.1 = 176) Installation method and pattern could cause waste higher than 10%. We do not guarantee the quantity of material on coverage; we sell it by the square foot of material delivered. Future orders will be charged at the quantity ordered at the time of each individual order.
Note pricing table for discounts.

The quantity of material in total square feet that you order made according to specifications in this listing; there are not necessarily equal or specific quantities in linear or square foot terms for each width. Shipped as random length individual boards combined in cardboard boxes of various sizes up to 100 sf per box depending on total quantity ordered. The customer should include extra in their total to cover a waste factor. Smaller and more complicated jobs have a higher waste factor.
Note this product has no guarantee for specific ratios of colors or lengths. This is a completely random blend and will vary from the pictures and from batch to batch.
Only shipped in 25 SF increments.
Lots of nostalgia along with comments on your decorating.
Free shipping (check our customer service page for terms).
Not including installation, finish material, glue, backing material or tools.

We sell a number of other paneling and flooring options in both solid wood and engineered, various thicknesses and widths, different wood species, along with a choice of textures and colors. Changing specifications will change the price.

See our warranty.
Solid wood paneling is sold as is.Â It matches the specifications provided here, but there is nothing to warranty on the natural, solid wood.
Not for exterior or structural use- Intended for interior dry, climate controlled applications only over plywood or OSB substrate. Â Wood is kiln dried to 6-8% moisture content; if ambient moisture is higher than that acclimate prior to installation.
All products sold by RLP are non-refundable and non-returnable since most are made to order.

Accent Wall Paneling - Oak Blend

Instructions

Quick Links

Company Address

Contact Us

Instructions

Advantages

Specifications

What is Included

Options

Warranty